Laboratory Biosafety Cabinet Air Laminer Flow Fume Hood Biological Safety Cabin

• Customization: Available
• After-sales Service: 24 Hours Online Service
• Warranty: 1 Year
• Model NO.: BHC-1000IIA2
• Downwind Speed: 0.33m/S
• Suction Wind Speed: 0.53m/S
• Noise: ≤67dB
• Half-Peak Vibration: ≤5 M
• Transport Package: Wooden Case
• Specification: 1-3person
• Trademark: Chinnofi
• Origin: China
• Production Capacity: 5000 Pieces/Year
• Package Size: 1300.00cm * 900.00cm * 2400.00cm
• Package Gross Weight: 300.000kg
• Lead Time: 20 days (1 - 1 Pieces) ; To be negotiated ( > 1 Pieces)

Product Description

BHC-1000A2 single-person economical biological clean safety cabinet

 

Product Description

• The unique negative pressure design of the inner cavity and air curtain isolation ensure that it does not leak under normal use. 70% gas circulation and 30% exhaust laminar flow method, the cabinet is pressurized to 500pa, and not less than 450pa after 30 minutes, which meets the standard of Class 2 biological safety cabinet.
• Ergonomically designed 10 ° tilt angle design for better operation experience.
• The outer box is made of high-quality cold-rolled steel plate and electrostatically sprayed; the three sides of the safety cabinet operating area are made of stainless steel (SUS304) integrated structure.
• 10m large rounded corners for easy cleaning.
• The control system adopts intelligent microcomputer control, and the LCD display can display the working area temperature, downflow and inflow airflow, membrane service life and other system parameters. Touch the buttons to adjust various parameter settings. The blue display numbers indicate the values of various parameters.
• Temperature sensor: real-time detection and display of temperature, wind speed sensor: real-time detection and display of downdraft and inflow airflow, monitor measure the safety status of the fan running and operating area.
• Equipped with height limit alarm device, when the moving glass door exceeds the specified height limit value (180mm), the sound and light remind the operator to ensure that the operator is more
• Safety.
• One-piece work surface is easy to remove and clean. There is a liquid collecting tank and a drain valve under the operation table.
• Equipped with alarm technology for failure and breakage and blocking of the device, and equipped with a fan overload alarm prompt to remind the user to replace the filter and fan in time.
• Equipped with a working window opening limit alarm system. When the opening height of the front window of the safety cabinet exceeds the set height, the downflow velocity and inflow of the safety cabinet
• When the air flow velocity fluctuates by more than 20% of its nominal value, the interlocking system activates an alarm.
• Equipped with two UPA ultra-high-efficiency filters as standard, it can achieve 99.999% shut-off efficiency for 0.12m particle systems, and the filter membrane material is boron-free.
• Silicate glass fiber.
• The UV lamp has a timing reservation function. The sliding door with integrated window can be positioned arbitrarily and can be completely closed for sterilization. Glass door is not low
• At 6mm safety tempered glass.
• Front window and germicidal lamp, lighting and fan interlocking design: The germicidal lamp can only be activated when the front window is fully closed.
• The bacteria light automatically goes out, the lighting light and the fan start at the same time, and the wind speed reaches the optimal state within 30 seconds
• With a bracket-type safety cabinet, the bracket can be separated from the upper box, which is convenient for handling and positioning.
• It has parameter memory and call recovery function which are protected due to power failure and crash state data loss.

 

Feature

1. Air curtain isolation design to prevent cross-contamination inside and outside. (Negative pressure type)
2. Move the glass door up and down, equipped with height limit alarm prompt, so that the operator can use it correctly.
3. There is a special filter at the exhaust place to control the discharge pollution.
4. Equipped with a special waterproof socket to provide operators with great convenience.
5. It adopts LED LCD panel control.
6. The experiment area is made of high-quality stainless steel, and the working area is equipped with a 2KW spare socket to provide convenience for operators.

 

Technical parameter

 

Parameter/Model	BSC-1000IIA2	BSC-1300I1A2	BSC-1600IIA2
Cleanliness class	HEPA: ISO class 5(Class100) /ULPA: ISO class4(Class 10)
Filter level/filtration efficiency	HEPA:≥99. 995%,@0. 3um/ULPA:≥99. 999%,@0. 12um
Downwind speed	0.33m/s
Suction wind speed	0.53m/s
Noise	≤67dB
Half-peak vibration	≤5 m
Power supply/Max power consumption	AC 220V/50HZ/ 1KW
Protection of biological safety personnel	CFU of all impact samplers<10.CFU of slot samplers≤5
Production protection	Samples of all sampling dishes CFU≤5
Cross-contamination protection	Samples of all sampling dishes CFU≤2
Working area size (L×W×H) mm	1000*520*640	1300*520*640	1600*520*640
Device Dimensions (L×W×H) mm	1165*760*2200	1465*760*2200	1765*760*2200
Air supply filter specification	990*470*70*	1290*470*70*	1590*470*70*
Exhaust filter specification	650*450*90*	830*450*90*	1130*450*90*
Specification and quantity of fluorescent lamp/ultraviolet lamp	i30W*/30W*	40W*/40W*	40W*/40W*
Illumination	≥800LX	≥90OLX	≥800LX
Weight	230 kg	270 kg	300 kg
Application number	1person	1-2person	2-3person

 

Company Profile

 

Customer

Workshop

 

Service

FAQ